How to Recone a Speaker in 5 Simple Steps

You use speakers everyday to play games, watch films and listen to music. But with regular use, speaker parts got old and damaged, especially the speaker cone. And the speaker’s technicians are charging HUGE amounts for repairs. In this case, you buy a new speaker instead of an older one.

You don’t know your speakers got repaired by reckoning it. What actually the reconing is? It means replacing the speaker’s cone, which helps to move and produce a sound. It’s as easy as pie to fix. This blog will show you how to record speakers using 05 simple methods. Alright, let’s go. If you want to remove water from speakers then test speakers from this web app.

What You Will Need:

recone-a-speaker

Before getting to hands dirty, first take these things:

  • A recone kit (includes a new cone, voice coil, and spider)
  • Screwdrivers
  • Utility knife
  • Sandpaper
  • Glue
  • Clamps
  • Paintbrush (for applying glue)
  • Rubbing alcohol or cleaning solution

So, that everything is ready, now let’s move on.

Step 1: Remove the Old Cone

The initial step is to remove the damaged cone from the speakers. Here’s the steps to remove this:

  1. Remove the speaker screws from the frame.
  2. Cut around the cone with a utility blade.
  3. Take out the voice coils and spiders (the round components inside the speaker).
  4. Easily remove the glue and dust from the speakers using sandpaper and cleaning alcohol solutions.

Precaution: Don’t be too quick, gently do this process to avoid any serious speaker frame damage! 

Step 2: Prepare the New Cone

Now let’s start preparing the new parts.

  1. Remove the cone, voice-coil, and spider from your recone kit.
  2. Monitor that all the parts fit well inside the speaker frame.
  3. If you feel corner edges are rough, use sandpaper to smooth them.
  4. It is important to clean your area before you install the new parts.

After this step you will be notified that your speaker system is secure and works properly.

Step 3: Attach the Voice Coil and Spider

It’s now time to install a new voice coil, spider and spider.

  1. Apply glue around the edge of the voice coil.
  2. Place the voice coil on the middle of the speaker frame.
  3. Attach the spider around and glue down the voice coil.
  4. Hold everything in place with clamps while the glue dries.

Let the adhesive set for two to three hours before you proceed.

Step 4: Install the New Cone

Attach installing the new cone & spider, voice coils are secured:

  1. Carefully, apply the glue around the speaker edges of the cone.
  2. Place the cone on top of the spider and gently press. 
  3. Ensure that all the parts are fixed in the correct place. 
  4. Let the glue dry completely before continuing.

Step 5: Reassemble the Speaker

Once the speaker cone is installed, assemble everything:

  1. Attach the speaker wires onto the new voice coil.
  2. The speaker frame can be screwed back together.
  3. Play some music to test the speaker.

Results: When everything sounds good, it’s done! You’re done! Your speaker will now produce a good quality sound as new one.

Conclusion

Reconing a speaker may seem like a sticky wicket, but the 05 best methods that we explain above would be helpful for you on how to record speakers easily. It would not only be helpful but also save you time and money. Apply patiently all the steps no need to hurry up in this matter, it’s a sensitive speaker part. After that, you can now enjoy your favourite songs, video games and anything without facing any problems!

FAQs

It may be necessary to recone your speaker if it produces poor sound quality, vibrates loosely or does not produce any good sound. Carefully check the prominent speaker cone damage.

It can take several hours for the glue to dry, but for best results, it may need up to 24.

Almost all speakers can easily be reconed. But some may require a special kit and tools. A few helpful tips you should always keep in mind: check your speaker’s model before purchasing a re-cone kit.

Similar Posts